Frame Grabber
P00000BK
2 Channel PCI Express Frame Grabber & MIPI C-PHY/D-PHY Combo Interface
Two channels of 1.125Gbyte/s of Miff packet data sent from the image sensor can be simultaneously transmitted to the host's memory in real time. It can receive image data by connecting with the MIPI C/D-PHY Interface Board that is used together, and also functions as a host bus bridge to control sensors.
PCI Express Frame Grabber (EVDC2EX8G2 V1.0)
-Automatic transfer of frame buffer area without CPU load
-64bit DMA transfer support
-Supports 2 channels of DMA channels and can be used independently
-Simultaneous transmission of two 1.6Gbps MIPI 4-Lane sensor
data with one dedicated cable
-Separate 90Mbyte / s bidirectional control communication for
sensor control
-High speed transmission of SPI, I2C,etc data, MIPI CSI-2, DSI
Packet reception / inspection
-Can receive camera of MIPI CSI-2 Type for transmitted MIPI
Packet.
-DSI Packet Processing and Display MIPI Packet Reception
-Error detection such as ECC and CRC during reception
MIPI 4-Lane Interface (EVMIPIC2L4G16 V1.0)
MIPI 4-Lane Interface
-Controllable with bidirectional transmission rate of 90Mbyte / s
-can be processed at high speed of I2C, SPI, etc.
-800Mbyte / s transmission per channel and Dual Channel MIPI - Packet transmission
-can Receiving MIPI 1.6Gbps 1,2,4-Lane
-Can supports I2C, SPI, Clock, I / O Voltage control function and reset, GPIO, etc.
-Easy to operate the whole system by implementing functions on one board
